Well Planning

Reports

The Well Planning report is used to record planned operations milestones, Well construction or workover requirements and engineering decisions to enable planned versus actual comparisons. The Well Planning report supports operations and well construction planning for the primary wellbore and any number of planned sidetrack wellbores. The well planner may create a list of planned sidetracks for the well program and all planned downhole data may be associated to a specific design, enabling engineers to record well programs for planned sidetrack and multi-lateral wells.

The Well Planning report supports the entry of a fully comprehensive Well Program and integrates with other Engineer's Desktop™ Well Planning application data sets.

Integration Note:  Well Planning reports are associated to a Design. This allows for natural integration with data created and calculated by Landmark's other well planning applications: COMPASS™, CasingSeat™, StressCheck™, PROFILE™ and WELLPLAN™. Some sections of the report are read-only when the associated Design is locked or another application has the Design open.

When creating a Well Planning report the following standards apply:

• Multiple Well Planning reports may be created within a single wellbore, one for each design.

• The Well Planning report that is associated with the planned design is used for general Planned vs. Actual comparisons (e.g., OpenWells® Output Reports). If no planned design is present a Well Planning report associated to a prototype may be used.

• Only one Design can be associated with a Well Planning report.

• No more than one Planned Design can be associated with a wellbore.

• Multiple Prototype Designs are allowed within a wellbore.

• If a Design is locked, Well Planning sections associated to the design will be read-only, except for those which are only exposed in the OpenWells Well Planning report.

The Well Planning report contains the following sections:

• General

• Casing Program

• Cement Program

• Completions

• Completion Strings

• Coring Program

• Directional Drilling Plan

• Drillstring Program

• Equipment

• Frac Gradient

• Geothermal Gradient

• Health, Safety and Environment

• Hole Plan

• Logging Program

• Mud Program

• Offset Wells

• Perforation Intervals

• Planned Operations

• Pore Pressure

• Sidetracks

• Stimulations

• Tests

• Treatments

• Well Services

• Wellbore Formation

• Remarks

Once a section has been completed, activate the Section Complete check box located in the section header. A green check mark will appear on the section icon () in the shortcut bar to indicate that all data has been entered in the section.

For information on creating a new report see the Report Command topic.

Customization Note: OpenWells software is a fully customizable application. Reports that have been customized by your company may not appear exactly as described in this help system.

To view a video on creating a new report, click here:

Related Topics

Reports

Report Properties

List of Reports in OpenWells

Navigating the Data Entry Form