Pipe Tally
Reports
OpenWells® software is equipped with two types of Pipe Tally reports:
Off-Load Pipe Tally — is used to record measurements of pipe joints being unloaded from a transport vehicle or vessel.
Run Pipe Tally — is used to record tubular joint lengths being run into the hole.
These Pipe Tally reports can be used for recording casing and tubing information as the equipment arrives at the rig or is run into the hole.
When a new Pipe Tally report is created using the Create New Report Wizard, select either Run or Off Load from the Tally Type picklist. A new Pipe Tally report is created depending on the Tally Type selected.
For information on creating a new report see the Report Command topic.
Customization Note: OpenWells software is a fully customizable application. Reports that have been customized by your company may not appear exactly as described in this help system.
To view a video on creating a new report, click here:
Once a section has been completed, activate the
Section Complete check box located
in the section header. A green check mark will appear on the section icon
(
) in the shortcut bar to indicate that
all data has been entered in the section.
Related Topics