Wellhead Data

Interactive Well Site > Available Reports Data

The Wellhead form is used to capture information on the wellhead, including general properties, wellhead components, outlets and hangers. The date entered in this report allows for reporting of the Wellhead control and monitoring system.

Note: Information entered into the Wellhead report integrates with PROFILE™  software where a detailed Wellhead schematic may be drawn. Additionally, both OpenWells® and PROFILE software support the Wellhead library enabling planned and actual Wellhead descriptions to be transferred between applications.

Wellhead data can be recorded from the surface and subsurface Activities link.

The Wellhead report allows the user to add, review, modify and delete wellhead data on a daily basis.

The Wellhead report is organized into the following sections. Click a topic to view more information.

• General - Record the general properties of the Wellhead including, operating conditions, inhibitors and coatings.

• Components - Define each external piece of the wellhead, excluding hangers, sequentially, from bottom to top.

• Hangers - Record information about the casing/tubing hangers, which are attached to the casing/tubing assembly and slipped into their respective spools/housing.

• Remarks - Contains a memo field that allows free-form text entry.

Special Fields and Functions

The contents of the Wellhead report can be imported and exported using the Import Wellhead from Library () and Export Wellhead to Library () icons in the Data Entry Form toolbar.

Import Wellhead from Library

The Import Wellhead from Library button is found in the toolbar of the Wellhead report data entry form. This button allows users to import a wellhead from a library of wellheads.

During the import, current wellhead information including components, outlets, hangers and controls is replaced with data from the library. Once an import has been completed, the user can cancel the changes by closing the Wellhead form without saving. The original wellhead data prior to the import is restored (i.e., all of the changes made by the import are cached and do not become permanent until the user saves them).

Integration Note! This dialog is part of an integrated workflow between OpenWells® software and PROFILE™ software. Wellheads created in either application can be exported to the wellhead library for later import.

To import a Wellhead from the Library:

From the Wellhead data entry form, select the button in the toolbar.

The Import from Wellhead Library dialog appears.

Select a Wellhead for import.

The Delete button allows the user to remove existing wellheads from the library.

Click OK.

The data in the Wellhead report is replaced by data from the library. To cancel the changes made by the import, close the data entry form without saving changes. The original data is restored.

Export Wellhead to Library

The Export Wellhead to Library button allows the user to export the current wellhead to the wellhead library. These exported wellheads can be used to populate other Wellhead data entry forms or PROFILE™ software wellhead entries.

Integration Note! This dialog is part of an integrated workflow between OpenWells® software and PROFILE software. Wellheads created in either application can be exported to the wellhead library for later import.

To export a Wellhead to the Library:

From the Wellhead data entry form, select the button in the toolbar.

The Export from Wellhead Library dialog appears.

Enter a descriptive name in the Wellhead Name field.

The Delete button allows the user to remove selected wellheads from the library.

Click OK.

The data in the Wellhead report is added to the Wellhead library.